How to clean the extractor hood
The kitchen is one of the main rooms of the home, since it is where you will keep much of the food, cook and even eat sometimes. Therefore, it is essential to keep it clean for hygiene reasons. In this sense, it will be especially important that the extractor hood is clean because it is one of the most used appliances and, therefore, one of the most dirty. On many occasions you will need the extractor hood to work at full capacity while cooking, since it is the only way to keep the environment free of odors and fumes. It also absorbs the grease in the smoke and vapors when you cook, so it easily accumulates a lot of dirt.
Cleaning it is essential to obtain a good performance, but it is not easy since it costs to access some parts of the hood. To find out how to clean the extractor hood, in inf-grinik we recommend that you continue reading this article in which we explain how the extractor hood of the kitchen is cleaned both inside and out.
How to clean the extractor hood inside
Knowing how to clean the grease extractor hood inside is very important because it is a delicate task. It is difficult to access all the parts that make up the appliance, but there are methods that allow cleaning the inside without having to reach the extraction tube through the final area.
Among the products to clean the extractor hood inside are specific degreasing products to clean stainless steel or similar kitchen materials. Apply it correctly to clean a smoke extraction hood by following these steps:
- Spray the inside with a degreasing product.
- Wait a few minutes for it to take effect (you can be guided by the product label on which you will put the necessary time in your case) and, when the dirt has softened by the used product, take a cloth to clean the dirt.
- Repeat the process several times until you observe the inside of the extractor hood completely clean.
Using baking soda is another trick to clean the extractor hood. This method requires more time and dedication, but it is also effective. Learn how to clean the extractor hood with baking soda by following this step:
- Put two pots full of water with baking soda on the plate or stove.
- Turn on the heats so that the pots begin to boil. At the same time, light the bell.
- The extractor hood will absorb the steam released by the pots, slowly dissolving the fat accumulated inside.
- Keep the pots on the plate for at least an hour so that the method is effective. If there is very little water left, you can add more water and baking soda, because you will have to watch that it does not run out of water so that the pot does not burn.
- Protect the plate with absorbent paper so that it absorbs the grease that can fall dissolved from the hood. If there was not much accumulated, nothing may fall, but if there was, it will fall and as soon as you see that it begins to fall, in fact, you can already remove the pots and put out the fires and clean the bell with a cloth inside.
- If you see any area where it is difficult to remove the accumulated dirt, you can make a mixture of water and baking soda in a bowl, with more baking soda than water so that a somewhat thick mixture is left, and with a brush, a sponge or a cloth, take some of this paste and rub it in the inside of the hood where you see more dirt. You will see how little by little all the fat and other residues come out.
- To finish you can wipe a wet cloth with only water or white vinegar to remove all the traces of dirt and leave the area clean.
How to clean the stainless steel extractor hood on the outside
To clean the exterior of the stainless steel extractor hood, follow these instructions:
- Disconnect or turn off the extractor hood so that there are no short circuits or cramps while you are cleaning it.
- The cleaning will depend on the material with which the hood was manufactured. In the case of stainless steel, it is convenient that you use a specific product to clean stainless steel.
- Try to clean with a cloth in one direction to avoid scratching or leaving marks, thus removing all the shine.
- To clean the bell control and its elements (buttons and screen, if you have one), avoid using liquids whose humidity can damage them. A dry or very little damp cloth will be enough to leave them clean.
How to clean the exhaust hood filters
Cleaning the filters of the kitchen hood is a task that requires the prior disassembly of the filters themselves. Consult the appliance user manual how to disassemble them, since the system may change depending on the manufacturer and model. When you have disassembled the filters, the best way to clean them is with the dishwasher, scheduling a washing cycle will be enough for you. If you don’t have a dishwasher, turn to a basin, or any other container full of hot water, and follow this process to clean very dirty hood filters by hand:
- Add a little degreaser and leave the filters for several minutes to soak.
- When the grease is softened by the effect of the degreaser, use a cloth to pass it through the filters and remove dirt.
- You can also use a soft scourer or a brush, but avoid abrasive products, such as aluminum scourers, because you will end up damaging the filters.
- Remember that, after cleaning the filters, you must do the same with the outside and inside of the hood before installing them.
If your extractor hood is recirculation, you won’t have to clean the filters because this system absorbs the air, filters it and returns it to the clean kitchen. Their filters are made of carbon and what you must do is change them when indicated by the manufacturer.
How often the extractor hood has to be cleaned
In addition to helping you discover how to clean the extractor hood, in a info-grinik we recommend that you clean the extractor hood after cooking. Thus, you will carry out daily maintenance and save yourself great efforts when you want to do a deep cleaning.
On the deep cleaning of the kitchen extractor, do one every 2 months. If you have done the daily maintenance, it will be much easier. To do this thorough cleaning, you will need to disassemble the filters and leave both the inside and the outside impeccable before reassembling them.
If you want to read more articles similar to How to clean the extractor hood, we recommend that you enter our Home Cleaning category.